Order no. ME11620
MEtherm 50 is no longer available:
Due to the numerous advantages of MEtherm® 51, we have decided to discontinue sales of its predecessor, MEtherm® 50, in the medium term.
Then use our live consulting service via chat or telephone:
To play this video, please allow cookies and other external services from YouTube.
The process media of the MEtherm series are tested and recommended by MELAG for automated cleaning and disinfection with MELAtherm 10 and MELAtherm 10 Evolution.
In the worst case, the use of unsuitable process media can lead to damage to the washer-disinfector and instruments, for which MELAG accepts no liability.
MELAtherm thermal disinfectors have a space-saving solution for holding your process media thanks to the process media drawer. Please use only compatible process media that have been approved for MELAtherm. Please make sure to wear personal protective equipment (PPE) when exchanging process media due to irritating substances.
If one of the MEtherm canisters has too low a filling level, a corresponding display message is shown on the MELAtherm. The used canister must be exchanged and replaced with a new one. To do this, proceed as follows when replacing the cleaner and neutraliser:
Unscrew the corresponding suction lance of the empty canister and hang it in the suction lance holder.
Insert the new opened canister of the same product and screw the suction lance back on.
Then start the deaeration programme of the MELAtherm to ensure optimum dosing of the process media.
In contrast to the neutraliser and detergent, the bottle of the MEtherm 61 rinse aid is not replaced after it has been used up, but refilled. To do this, fill the original packaging of the rinse aid to approx. ¾ full and then screw on the suction lance. Then start the deaeration programme here as well.
The mildly alkaline cleaner MEtherm 50 and rinse aid MEtherm 61 are suitable for use in every specialist practice due to their particularly high material compatibility and guarantee the best reprocessing results for instruments of all kinds.
As a neutraliser, the MEtherm range offers two variants: MEtherm 55 C - a citric acid-based neutraliser - and MEtherm 56 P - a phosphoric acid-based neutraliser.
MEtherm 55 C is a particularly material-compatible neutraliser especially for the machine reprocessing of dental transmission instruments as well as for the instruments in ophthalmological practices.
In contrast, MEtherm 56 P is to be used especially for the machine reprocessing of medical devices from the specialist areas of gynaecology, ENT and surgery. It is not suitable for reprocessing in ophthalmological areas.
The ultimate high-performance cleaner for mechanical instrument reprocessing in the MELAtherm. The special cleaning performance and minimisation of the formation of deposits on the instruments and the washing chamber contribute to their value retention.
